Mare’s Leg Shoulder Rig

Video

 

Beaver News #56 – July 3, 2017


You dreamed it ….. we made it. You’ve asked for it, and we deliver:

We’ve taken our normal Mare’s Leg Holster and implemented it into a shoulder rig. It comes with

  • a plain ammo plate or an ammo plate of 6 or 12 cartridge loops
  • left- or right-handed which means you can have this as a cross-draw as well.

You can adjust the harness in a way that the holster is all the way up or further down. No matter if you are a tall or a short person, you can customize the fit of your shoulder rig and holster to your liking.

This also takes the weight off the hips and puts it more on the shoulders which equalizes it out if you wear a belt with a knife on it, for example, or you are moving around a lot, you never have the gun sitting down so far.

You can have this Shoulder Rig with any of our Mare’s Leg holsters:

And last but not least, we also added (by demand) that you can switch the hammer tab from the outside to the inside, there are instructions in the video below on how to do that.

Click on the image below to watch our latest video.

Leg Strap with Buckle for your Mare’s Leg Holster

Video

 

Beaver News #54 – June 5, 2017


We are very excited to introduce you to a new product.

Our Mare’s Leg Holster comes standard with a leg tie, and now we offer that you could order it with a Leg strap and buckle in lieu of the leg tie. 

If you already have your Mare’s Leg Holster and you would like to switch from the tie to the strap, we offer a Leg strap kit that you can install yourself. 

This product is soon available in the Online Shop, If you wanted to order it already, just send us an email and we will get your details and ship you the strap and buckle kit.

In this Video Mark explains how you can exchange your leg tie with this leg strap. Click on the video below to check it out:

Moving the leg tie on your Mare’s Leg Holster

Video

 

Beaver News #52 – May 8, 2017

People have asked us “how do I move the leg ties on my Mare’s Leg Holster”? So we thought we make a short video about it since there is a little trick to it.

Don’t own a Mare’s Leg Holster yet?
Order yours here, you can choose between six different styles.

When you receive your hand-made, high-quality Mare’s Leg Holster from us, the leg ties are on the middle setting of the 5-holes, but you might need it higher or lower.

So how do you move them up or down?

This is what Mark explains in this short video. First Mark shows you how to figure out in what hole your leg ties should be and then how to move them there.

What you will need:

  • pliers
  • a basic paper clip
  • and a little bit of patience
  •  
    Watch the video below and let Mark show you how to do it:

    Mark carving the Grizz – part 2

    Video

     

    Beaver News #51 – April 24, 2017

    This is part 2 of our behind-the-scenes video that gives you a glimpse into how Mark carves the Grizzly that is featured on our Mare’s Leg Rig “Grizz“.

    If you missed part 1, watch it here. You’ll get to see how Mark does all the basics, the carving, the pressing and the relief and bringing the animal out by accenting the edges, like a 3D effect.

    Now in part 2 you’ll see him work on the hair. It’s a long process, as Mark mentiones, Grizzlies are quite hairy fellas :-). The longer he works on it the more you’ll see the Grizzly really coming to life, at one point it even seems to attack you through the screen….

    The next step is dying and don’t you startle at first when you see him applying the dye all over this beautiful carving? But then, all cleaned up and waxed, you’ll see how amazing it looks and at the end of the video you’ll see the hole rig all put together.

    Click ont he image below to watch this majestic animal come to life.

    Mark carving the Grizz – part 1

    Video

     

    Beaver News #50 – April 10, 2017

    This is a behind-the-scenes video that gives you a glimpse into how Mark carves the Grizzly that is featured on our Mare’s Leg Rig “Grizz“. It’s a two part series and this is part 1.

    We jump in right after Mark has traced the outlines onto the leather and used the swivel knife to cut the outline out. Now he shows you how he does the carving, the pressing and the relief, this is still all the basics, as you will see.

    Then he is bringing the carving out by accenting the edges, like a 3D effect. For that he uses a stamping tool, and the object is to using pressure, pushing down and smoothing it out at the same time, but the leather has to have just the right dampness for that.

    When he makes the hair, and highlights the hair, the carving is going to stand out like the animal is charging you with the hair all up in hackles.

    Every one of our carvings, even though there are similarities, is unique, just like every animal or every person is unique. There is not two that are identical.

     

    Molded and lined Mare’s Leg Rig

    Video

    Beaver News #37 – May 30, 2016

    In this episode, Mark introduced ‘the big brother’ of our famous Mare’s Leg Holster

    This holster comes fully lined and form fitted to the rifle. We can manufacture the following variation of the regular Mare’s Leg also in this higher end version such as:

    – border tooling only
    – with Keeper/Concho
    – Last Bullet

    We can build it as a slide-on holster that you can wear with any gun belt (i.e. our unlined Prospector Belt or our lined Drifter Belt) or with a holster backing to wear “cowboy Style” on a Buscadero belt.

    Watch the video by clicking here or on the image below.

    Action Ready Sling

    Video

    Beaver News #34 – April 11, 2016

    In this week’s video, Mark demonstrates our action-ready Sling. 

    This unit is perfect if you don’t want to carry a holster with you. It’s the unit Mark uses when he goes out in the bush to work, bushwhacking, gold panning or simply enjoy himself.

    This sling is very versatile and attaches easily to your rifle. It’s fully adjustable and we make it to the thickness and width you want.

    Watch the video by clicking here or on the image below.

    New Mare’s Leg in our Online-Store

    Beaver News #18 – August 17, 2015

    Mare’s Leg Holster “Last Bullet”

    As previously announced you find now yet another variation of our best selling Mare’s Leg Holster  in our Online-Store, this one is called “The last Bullet”. This makes it six variations in the Mare’s Leg Holster family and all of them you can order through our online store.

    When you check out the “Last Bullet” Mare’s Leg you will notice a cool new feature that we added to our website.

    When you hover over an image in the online store, you can now inspect in detail the quality of our products with a Zoom Magnifier !

    Try it out, it’s really cool.

    Testimonials

    we got awesome feedback lately for our Mare’s Leg Holster, here two of them:

    Nick from Pemberton BC wrote [quote]:
    “The only thing I regret is I didn’t buy one sooner! Amazing quality fits perfect”.

    Trevor from Manitoba says [quote]:
    “I received the holster this morning and I am very pleased. The belt fits properly. Thank you.”.

    How awesome is that !  It makes our day to hear that our customers are happy with our products. Our goal is to manufacture a product that exceeds your expectation and wildest dreams AND that is also useful and practical at the same time.